debug cellular

This command debugs the cellular interfaces.

Syntax

# debug cellular {<Interface Index>|qmi_proxy|remote|usb_devices} [syslog]

Command	Description
Interface Index [0/0 or 0/0/sub_if_ID]	Defines the cellular interface to debug: ■ 0/0: Main cellular interface. ■ 0/0/<Sub Interface ID>: Debugs a specific APN when dual APNs are configured.
qmi_proxy	Enables QMI proxy debug log messages for the cellular interface.
remote {dmesg|logcat|watchdog)	Enables debug logging on the M5G-EA cellular module: ■ dmesg: Collects kernel logs from remote M5G-EA cellular module. ■ logcat: Runs logging operations on remote M5G-EA cellular module. ■ watchdog: Stops watchdog service on remote M5G-EA cellular module for debugging
usb_devices	Displays connected cellular USB devices.
syslog	Enables sending debug of the cellular interface to Syslog.

Command Mode

Privileged User

Example

This example displays connected USB devices:

# debug cellular usb_devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.21.7-Cavium-Octeon dwc_otg_hcd
S:  Product=DWC OTG Controller
S:  SerialNumber=dwc_otg
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms